Mpco The Magic Powder Company One AC Powder 200GM

Description

Mpco The Magic Powder Company One AC Powder 200GM
Product Overview
MPCODeveloped for the non-sweating horseControls anhydrosisSource of vitamins
and mineralsONE-AC Description:One AC Powder is a nutritional supplement
developed specifically for horses who cannot sweat. The ability of a horse to
sweat is an essential physiological response if the horse is to perform in hot
and humid climates. Failure to sweat (anhydrosis) can jeopardize the equine
athlete's life if forced to perform. One AC Powder contains necessary vitamins
and minerals in balanced proportions to allow the horse to produce enzymes
necessary to sweat, thus allowing the horse to begin sweating.Feeding
Directions:One AC is weight dependent.Average size horse, 950-1100 lbs, one
teaspoon twice daily (AM PM).Horses over 1100 lbs add teaspoonful for every
100 lbs over maximum weight.Horses 600-900 lbs: 1 teaspoons daily (3/4 AM3/4
PM).Horses 300-600 lbs: one teaspoonful daily. Miniature horses respond well
to 1/2 teaspoonful daily.One teaspoonful =2.35 grams (.102 oz.)Guaranteed
Analysis:L-Tyrosine (minimum)36%Niacin (minimum)36288 mg/lbVitamin B6
(minimum)35380 mg/lbd-Pantothenic Acid (minimum)66225 mg/lbCholine
Bitartrate145152 mg/lbIngredients: L-Tyrosine, Choline Bitartrate, Niacin,
Pyridoxine Hcl, d-Calcium Pantothenate
Features
-When the imbalance of excess stress combine with high temperatures and humidity, horses begin to suffer the debilitating effects of anhydrosis.
-No side effects have been reported from using this feed supplement. There are no ingredients in ONE AC that are known to cause a problem for pregnant and lactating mares.
-No animal has tested positive for drugs while using ONE AC.
-ONE AC is weight and work dependent and was designed for the average sized horse (950-110lbs). Therefore, for larger or smaller animals, the dosage needs to be adjusted. Add or subtract 1/2 tsp per day for every 100 lbs. over or under the designed minimum or maximum weight.
-Field tested by Univ of Florida. Safely on the market for 15 years.
Details
Is Discontinued By Manufacturer : No
Product Dimensions : 3.7 x 3.7 x 3.6 inches; 5.6 Ounces
Date First Available : May 7, 2011
Manufacturer : MPCO THE MAGIC POWDER COMPANY
Best Sellers Rank: #16,180 in Pet Supplies (See Top 100 in Pet Supplies) #111 in Horse Health Supplies #1,220 in Dog Health Supplies
#111 in Horse Health Supplies
#1,220 in Dog Health Supplies
Customer Reviews: 4.7 out of 5 stars 156 ratings
Quality Products
Have peace of mind knowing that your order will arrive original factory sealed packaging. That means that you'll have the full force of the manufacturer's warranty to protect your purchase.
Fast and Free Shipping
You're already purchasing the item. Why pay additional for shipping, especially slow shipping? We get your order shipped out and delivered to your doorstep as quickly as possible.
Commitment
We are committed to making sure that you leave this transaction satisfied. That means having access to real people that get your questions and concerns answered quickly. Give us a shot and we will make sure that you will look to us again!
250 gallon white vertical leg tank.
Constructed with FDA Approved resins for drinking water
30" wide, 89" tall. 8" fill opening with lid. 2" drain outlet.
We can ship tanks from 9 different locations all across the country.
These tanks are also for sale at our physical store, therefore in the off chance the tank is not in stock it can be up to a 3 week lead time depending on the manufacturer's schedule.
Message us with zip code for freight quote prior to bidding or purchasing
All tanks are brand new.
Tank has 3 year warranty.
We offer big discounts on truck load quantities.
Frequently Asked Questions:
WHAT MATERIAL IS USED TO MAKE YOUR TANKS?
The Manufacturer uses a linear, high-density polyethylene resin that provides outstanding environmental stress crack resistance. The resin is UV stabilized but by keeping the tank sheltered or indoors you will prolong the life of your tank.
ARE YOUR TANKS FDA APPROVED?
The resins used to manufacture our tanks meet specifications contained in FDA Regulations 21 CFR 177.1520, (c) 3.2 and so may be used as an article or component of articles intended for use in contact with food, subject to any limitations in the regulation.
WHAT TYPE OF SURFACE IS REQUIRED FOR PLACEMENT OF A VERTICAL TANK?
Inspect the surface to ensure a smooth, level area that will supply full bottom support. A properly constructed concrete pad that is capable of supporting the contents of the tank is the best support and is recommended above 2,000 gallons. Other materials such as very flat blacktop, or contained, packed sand or pea gravel have been used successfully. All surfaces must maintain uniform support through freeze/thaw, erosion and other disturbances.
WHAT IS THE WALL THICKNESS OF THIS TANK?
This tank is constructed to handle liquids with a specific gravity of 1.5 or 12.5 pounds per gallon. Because the wall thickness varies from top to bottom on a tank, it is not the best gauge for determining the quality of a tank. The very bottom of the tank is the thinnest part of the tank and is made that way to flex when the tank is empty or full.
Generally the wall becomes thicker as you go from the top to the bottom of a vertical tank.  This is done to increase resistance to head pressure created by the height of the liquid in the tank. The actual weight of the tank is also not a good comparison when shopping for tanks. Just because a competitor may use more material in the tank does not make it a better tank. That is determined by the resin, mold design and the steps taken during the rotomolding process.
WHAT IS THE MAXIMUM TEMPERATURE THAT YOUR TANKS WILL WITHSTAND?
Polyethylene storage tanks have a maximum storage temperature of 120 degrees F. Contents with a temperature in excess of 120 degrees F-even for a short period of time-can weaken the tank's structural integrity and make it susceptible to deformation and failure.
WHAT WILL HAPPEN TO MY TANK IF I LEAVE IT OUTSIDE IN FREEZING TEMPERATURES?
The tank itself does not have a minimum temperature rating. If you plan to keep the liquid in the tank and you know that it will freeze, make sure that you leave room for expansion. The most likely part to crack on the tank is the bulkhead fitting which can be easily replaced.
CAN I STORE PETROLEUM PRODUCTS IN THE TANKS?
We recommend that you do not store petroleum products in our tanks because they will soften the tank walls.
HOW MANY YEARS WILL MY TANK LAST?
There is no good way to determine the life span of a polyethylene tank. Many variables can have an effect on the tank - what type of material is being stored in the tank? Is the tank used indoors or outdoors? If the tank is outdoors, what part of the country are you located in? Tanks used outdoors in Arizona or Florida are subjected to more intense sunshine than in Minnesota for example. UV rays will have a detrimental effect on the life span of any poly tank. Is the tank being used strictly for stationary storage or for transport? Each of these factors will have an effect on a polyethylene tank.
CAN YOUR TANKS BE PRESSURIZED?
No, our tanks cannot be pressurized.
CAN YOUR TANKS BE BURIED?
Tanks specifically designed for above ground use cannot be put underground. If it is put below ground, the weight of the earth around the tank will cause the walls to collapse. We do carry septic and cistern tanks that are designed to be buried.
Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application